Coral Springs roofing company
Coral Springs regulates roof color, so a new roof here starts with the approved list, then the HOA, then eTRAKiT. We take care of all three for tile, metal, shingle and flat roofs, with tear-off in every per-square price.
We install and replace roofs. We don't offer roof repairs.
Four roof types
Lines we install
In the HVHZ, every roofing component needs a current product approval, so we pick the brand and line by roof type, approval and HOA rules.
Logos belong to their owners. Listing a brand doesn't mean a manufacturer certification.
Installed price
From $10,000**$10,000 is our minimum job price. Per-square prices include tear-off. Every home gets its own written quote.
Roofers price by the square. One square is 100 square feet of roof surface, so a roof with 2,000 square feet of surface is 20 squares. Pitch, hips and valleys add surface beyond the home's floor area. These six things move the price most:
Installed price per square (100 sq ft of roof):
Worked example: a roof with about 2,000–2,200 sq ft of surface is 20–22 squares. Estimated installed totals with tear-off:
| Roof type | Price per square | 20–22 squares, estimated total |
|---|---|---|
| Architectural shingle | $700 | about $14,000–$15,400 |
| Concrete tile | $1,075 | about $21,500–$23,650 |
| Standing-seam metal | $1,125 | about $22,500–$24,750 |
| Clay tile | $1,175 | about $23,500–$25,850 |
Financing is subject to credit approval, as low as 6.99% APR for qualified borrowers over 10 years, $0 down: about $116.06 a month for every $10,000 financed (120 months). See financing, the full roof cost guide, or shingle vs. tile vs. metal roofing in Florida.
The short version
| City Hall | 9500 West Sample Road; 954-344-1000. Building: 954-344-1025. |
|---|---|
| Filing | Online in eTRAKiT, with the work listed in caps (for example, REROOF). Source |
| Roof colors | Tile must come from the city's approved colors; dark antiquing and contrasting blends are generally not allowed. Source |
| Off-list colors | Go to the Architectural Review Committee, which meets on the second Wednesday. Source |
| Flood rule | 50% of pre-work market value; the city may use the county assessment roll. Source |
| Wind | In Broward's HVHZ: 170 mph for Risk Category II homes (FBC §1620.2). Source |
Last reviewed October 30, 2026.
City of Coral Springs homes
Most Coral Springs streets were built as planned neighborhoods, and the city still guards that look. The roof you can install is narrower here than in most of Broward.
Re-roof permit
Two city departments touch a Coral Springs roof: Building for the permit, Community Development for the look. Here is the order we work in.
HVHZ, NOA, the 25% rule
Check any NOA yourself on Miami-Dade's product control search or on floridabuilding.org.
Wind mitigation
Your insurer and your policy decide the final credit. See roofing and insurance.
From estimate to final inspection
We measure the roof for free. The quote is usually back within 24–48 hours.
You sign a written contract for the roof type, scope and price.
We prepare the application with the colors and product approvals your board asks for.
We file the re-roof permit in Coral Springs' eTRAKiT after the color is approved. It usually takes one to four weeks.
We order the approved roofing materials for your roof.
We tear off the old roof down to the deck.
The building department checks the deck and underlayment before the new roof goes on.
We install the new tile, shingle, metal or flat roof per its product approval.
The building department signs off, and the permit is closed.
Broward County
We roof in Coral Springs and across Broward County from our office at 2901 SW 3rd Ave STE 1B, Fort Lauderdale, FL 33315. Each Broward city runs its own permit office, under the same HVHZ roofing code.
Yes. Cement and clay tile must match the city's approved colors and styles. Anything else needs Architectural Review Committee approval.
In eTRAKiT, the city's online permitting system. We upload the Roof/Re-Roof checklist, HVHZ application and product approvals and answer plan review comments.
Clay tile runs $1,175 a square installed with tear-off, so a 28-square roof is about $32,900. Concrete tile is $1,075 a square, and a flat section is $850 (non-insulated).
Zoning handles roof color inspections at 954-344-1160. Building Customer Care is 954-344-1025.
If you have an association, yes; the city's roof guidelines put HOA approval ahead of the city's own review.
It may use the most recent county assessment roll or a depreciated replacement-cost valuation, then compares your project cost to that number.
Primary sources
Free, in person
We measure the roof, check the city's rules and send the quote, usually within 24–48 hours.
Real Republic jobs
Metal, tile and shingle roofs we installed in South Florida.
Real South Florida homes, real Republic crews.
Financing
12
Months
No interest if paid in full
10
Years
at 6.99% APR
$0
Down
about $116/mo per $10k financed
Lenders
12-month offer is deferred interest: if not paid in full by the end of the promotion, interest is charged back to the purchase date. Subject to credit approval.
Estimates
Calculate what this project will really cost you, and your return on investment.
Your numbers
The wind or hurricane part of your homeowners premium, shown on your declarations page.
$0.00
As low as 6.99% APR for 10 years, for qualified borrowers.
$0.00
Estimate only. Assumes 10% of your windstorm premium. Your insurer's Notice of Premium Discounts shows your actual credits.
$0.00
Payment minus the insurance savings.
0.0 years
Project cost divided by yearly insurance savings.
Estimates only. The insurance percentage is an assumption, not quotes. Actual savings depend on the insurer, the home, and usage. Not a guarantee. Financing is subject to credit approval.
