How much does a shingle roof cost?
$700 per square (100 sq ft of roof), installed with tear-off, with a $10,000 minimum job. A 20-square roof works out to $14,000 before any change in scope. Every home gets its own written quote.
How long does a shingle roof last in Florida?
Typical South Florida service life for an architectural shingle roof is 15–20 years. That's separate from the manufacturer rating: CertainTeed, GAF and TAMKO list lifetime limited warranties, with terms that depend on the line and the accessories used.
Does roof age affect my insurance?
Under Fla. Stat. §627.7011(5), an insurer may not refuse to issue or renew a homeowner's policy solely because of roof age if the roof is less than 15 years old. Once a roof is 15 or older, the insurer must let you get an inspection by an authorized inspector, at your expense, before requiring replacement, and can't refuse solely because of age if it shows 5 or more years of useful life left.
Can I finance a shingle roof?
Yes, subject to credit approval. Financing runs as low as 6.99% APR for qualified borrowers over 10 years, $0 down. That's about $116.06 a month for every $10,000 financed (120 months).
Which shingle brands do you install?
CertainTeed Landmark Series, GAF Timberline, TAMKO Heritage and Titan XT, and Owens Corning TruDefinition Duration. All four carry current Miami-Dade NOAs.
What is an architectural shingle?
A laminated, dimensional asphalt shingle. All four NOAs on this page cover laminate (dimensional) shingles, sized about 13¼ inches by 38¾ to 39⅜ inches.
What are the HVHZ rules for shingle roofs?
In Miami-Dade and Broward, shingles follow FBC 1518.7 and RAS 115: a current product approval, at least six nails per shingle, set edges and starter course, metal perimeter and valleys, and a 33-ft mean roof height limit unless the approval allows more.
What about Palm Beach County?
Palm Beach is outside the HVHZ. Shingles follow FBC 1507.2: a solid deck, a slope of 2:12 or more, ASTM D3462 shingles, at least four fasteners per strip shingle, and a wind class from Table 1507.2.7.1.
What do ASTM D3161 and D7158 mean?
They're wind tests the code uses to classify shingles. At the highest wind speeds in FBC Table 1507.2.7.1, a shingle must be ASTM D7158 Class H or ASTM D3161 Class F. GAF and TAMKO list both ratings on their pages.
What underlayment goes under the shingles?
One of the code's three methods: full self-adhered ASTM D1970, taped deck joints with an approved underlayment, or two layers of approved felt or synthetic (FBC 1518.2.1 and 1507.1.1.1). Your quote names the one we use.
Can a shingle roof lower my insurance?
It can help. On form OIR-B1-1802 (Rev. 04/26), Question 4 covers the roof covering and its product approval, and Question 8 covers secondary water resistance. Your insurer sets the actual credit.
Is there a code change coming?
Yes. The 9th Edition Florida Building Code takes effect 12/31/2026. Miami-Dade says it changes HVHZ testing and attachment rules for hip and ridge shingles.
Do you tear off the old roof?
Yes. Every shingle job includes tear-off of the old roof down to the deck before the new underlayment and shingles go on.
How long does a shingle roof take?
Often one to three days on the roof, after the permit, which usually takes one to four weeks.
What warranty comes with it?
A 10-year labor warranty from Republic. Product warranties come from CertainTeed, GAF, TAMKO or Owens Corning and depend on the line and the accessories used.
Where do you install shingle roofs?
Miami-Dade, Broward and Palm Beach counties only. We install and replace roofs; we don't offer roof repairs.