How much does a tile roof cost?
Concrete tile is $1,075 per square (100 sq ft of roof) and clay tile is $1,175 per square, installed, with a $10,000 minimum job. A 20-square roof works out to $21,500 in concrete or $23,500 in clay before any change in scope. Every home gets its own written quote.
Can I finance a tile roof?
Yes, subject to credit approval. Financing runs as low as 6.99% APR for qualified borrowers over 10 years, $0 down. That's about $116.06 a month for every $10,000 financed (120 months).
Which tile brands do you install?
Verea clay tile, Westlake Royal concrete and clay tile, and Eagle Roofing concrete tile, over Polyglass Polystick TU Plus underlayment.
Concrete or clay tile?
Concrete tile meets ASTM C1492 and costs $1,075 per square with us. Clay tile meets ASTM C1167 and costs $1,175 per square. Both follow the same HVHZ install rules (FBC 1518.8).
Which tile profiles can I choose?
Eagle High, Medium and Low Profile; Westlake Royal Estate S, Villa 900 and Two Piece Mission clay; Verea Barrel, Spanish S and Flat. Your HOA may limit the profile and color.
Is the tile set with foam or nails?
It depends on the tile's product approval. The Eagle and Westlake Royal concrete NOAs list nail-on, mortar-set and foam adhesive-set systems. Above a 7:12 slope in the HVHZ, every mortar- or adhesive-set tile is also mechanically fastened (FBC 1518.8.10).
What are the HVHZ rules for tile roofs?
In Miami-Dade and Broward, every component needs a current product approval (FBC 1512.2.1), tile goes over a solid deck per RAS 118, 119 and 120 (FBC 1518.8.1), and Miami-Dade tile permits must show an underlayment uplift rating of at least 45 psf unless it's the 30/90 hot-mop system.
What about Palm Beach County?
Palm Beach is outside the HVHZ. Tile follows FBC 1507.3: solid sheathing and the FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Seventh Edition.
Can a tile roof lower my insurance?
It can help. On form OIR-B1-1802 (Rev. 04/26), Question 4 covers the roof covering and its product approval, and Question 8 covers secondary water resistance. Your insurer sets the actual credit.
Do you tear off the old roof?
Yes. Every tile job includes tear-off of the old roof down to the deck before the new underlayment and tile go on.
How long does a tile roof take?
Often three to five days on the roof, after the permit, which usually takes one to four weeks.
What warranty comes with it?
A 10-year labor warranty from Republic. Product warranties come from the manufacturer and depend on the line.
Where do you install tile roofs?
Miami-Dade, Broward and Palm Beach counties only.
Do you repair tile roofs?
No. We install and replace roofs. We don't offer roof repairs.